Other

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Hope Pad Clip - Fits Tech and Tech Evo M4, X2, and V2 Brakes

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

- Aheadset preload adjusting bolt

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

Hope Brake Lever Parts

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

• Designed to keep dust and dirt out of V-Brake cable/housing systems

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

- M8 Top Plate Bolt

FSA Mega Exo Small Parts.

- Crown Race - Size: 27.0mm

- Type: Lock washer - Size: 1" Keyed

- Model: Replacement bolt - Compatibility: Allen, M5x16

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

KS Dropper Post Service Parts

- Crown Race MX - Size: MX TH 26.4mm

- Routes cables underneath the bottom bracket - Will not rust or corrode

- w/Nut - 1-3/4-inch

- Rubber - Color: Black

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

Keep your elbow pads in place. - Necessary for proper assembly - M4 x 10mm

FSA Mega Exo Small Parts.