Filter By:

Aero

Sunlite Bull Horn Bars
$21.99
Building up an urban fixie or townie bike? Then you just have to have the classic Bull Horn Bars from Sunlite. They're made from aluminum with a steel center sleeve, so they're light, stiff and durable.
Profile Design Stoker 26 Base Bar
$44.99
Profile's Stoker 26 Base Bar features a 26.0mm diameter the entire length across the bar, allowing the widest aero bar clamping area that Profile makes. This makes the bar ideal if you have a wide aero position or need a comfy stoker bar for your tandem. Made from double-butted 6061 aluminum, the Stoker 26 is light, not to mention shot peened and anodized for added strength and durability. Plus, it's pre-drilled for internal cable routing for aerodynamics and a clean look.
Profile Design Airwing OS Base Bar (31.8mm)
$54.99
The Airwing has a deep drop to keep you in a wind-cheating aero tuck, making this a perfect base bar for triathlons and time trials. Made from double-butted 6061 aluminum, the Airwing is super light and boasts a wide clamping section that will accept any Profile Design clip-on aero bar. Plus, it's shot peened and anodized for added strength and durability and pre-drilled for internal cable routing for aerodynamics and a clean look.
Zipp Vuka Alumina Base Bar
$70.00
The Zipp Vuka Alumina, crafted from 6066 series aluminum, offers a base bar with superior aerodynamics and ergonomics at an affordable price. - Handgrips are angled upward by 5 degrees for a natural wrist position when climbing or sprinting - Sleek with clean internal cable routing for easy installation
Profile Design WING/10a
$79.99
The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops
Bontrager Elite Aero VR-CF Road Bar
$89.99
The drag-defying profile of Bontrager's Elite Aero VR-CF Handlebar is proven to save up to 23 seconds per hour over a traditional round handlebar. Take advantage of the shaped 6066-T6 aluminum and internal routing, and bring your ride's aerodynamics to the next level. - Custom-butted, 6066-T6 alloy construction - Variable Radius Compact Flare (VR-CF) increases wrist clearance for ergonomic positions - Compatible with clip-on aero bars - Aero drop bar profile is more aerodynamic compared to traditional round bars - Internal cable routing for Di2 and standard housing - Laser-etched brake lever position lines for spot-on control setup - UCI compliant
Vision Aluminum Base Bar
$89.99
Vision's Aluminum Base Bar is made of triple-butted 6066 T6 aluminum for excellent stiffness and lightness, plus it boasts fully internal cable routing to keeps things slippery and low-drag. The wide 31.8mm clamp section has more than enough real estate for your preferred aero bar extensions and arm pads (sold separately).
Profile Design Carbon Stryke Clip-on Aerobars
$150.00 $200.00 25% Off
When it comes to fighting the clock, the Carbon Strykes give you the advantage you need. These aero bars feature a wide array of hand positions and amazing vibration damping to ensure you’ll comfortably stay in a wind-slicing tuck. And Profile's F-19 arm rests give you a fast and comfy racing stance. The Strykes fit most handlebars thanks to Profile's ingenious Multi-Fit System, too.
Profile Design Ozero Base Bar
$163.99
Profile's Ozero Base Bar boasts superior aerodynamics thanks to its slippery hydroformed shape. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Ozero puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!
Zipp VukaBull Base Bar
$237.00
Get your next time trial or triathlon off to the right start with Zipp's VukaBull Base Bar. It's the first thing you reach for when you blast out of the start gate, so Zipp takes extra care with the carbon layup to ensure you have the lightest, most robust bar possible. The slightly concave nose section and forward-swept arms, along with the airfoil shape, reduce drag and stiffen the bar. Ergonomics are the key to comfort and speed, so it's available with a choice of zero or 40mm drop and the grips are angled up slightly for a more natural wrist angle when climbing and sprinting. Additionally, it has an extra wide aerobar clamping area for maximum versatility and adjustability.
Profile Design T3 Plus Carbon
$249.99
T3 Plus Carbon Aerobars with ergonomic drop-bend extensions allow for the widest variety of hand positions for individual comfort. The revised T3+ Carbon extension brings improved electronic and mechanical shifting cable management to this innovative wrist relief bend. Anchored by the J5 bracket with the streamlined Inline Compression Clamp (ICC), this bar provides single bolt extension adjustment so dialing in your fit is simple and easy. The updated offset bridge matched with the F40tt armrest gives the system enormous range of reach and width adjustability. For additional integration an optional BTA bridge is available. Tech specs: - Bracket: J5 Bracket - Armrest: F40tt - Stack: 55mm – 125mm (w/Aftermarket Riser Kits) - Reach: -9mm – -77mm (7.5mm Increments) - Width: 155mm – 296mm (Center to Center) - Extension Length Adjustment: 229mm – 335mm (Center of Basebar to Tip) - Extension Length: 376mm - Extension Height: 66mm - Extension Angle: 40-degrees - Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 575g
Profile Design Svet V Carbon Base Bar
$274.99
The Svet V Base Bar features a low stack height and a deep drop, placing the rider in a low, aggressive steering position when out of the aerobars. - Multi-direction, multi-layer carbon fiber construction - Two-Way Fit System: Aggressive fit in standard position. Flip the base bar for a more elevated position - Straight Brake Extension: Help maintain control while remaining aerodynamic - Clean Cable Routing: Pre-slotted for internal cable routing. Di2 compatible. - 3:1 wing section with zero drop
Profile Design Svet TT
$290.00
The Svet TT was designed for Time Trial and Triathlon usage and features a sleek UCI compliant 3:1 wing. Strategic cable slot positioning enables streamlined internal compatibility for electronic or mechanical shifting cable management while the zero drop and upturn brake extensions provide better positioning for climbing and cornering while in the pursuits. - Weight: 210g (42cm) - Width: 44cm (center to center) - Center Clamp Diameter: 31.8mm - Clamp Width: 140mm - (44mm) - Clip Compatible: Yes - Material: Multi-Direction, Multi-layer Carbon Fiber - Pursuit Reach: 165mm (center to tip) - Pursuit Drop: 0mm - Pursuit OD/ID: 25.4 / 19.5mm - Drop Outsweep: No
Bontrager Race X Lite Carbon Aero Bullhorn
$349.99
Bontrager's Race X Lite Carbon Aero Bullhorn is light, strong, ergonomic and a great upgrade for your wind-cheating machine. Its hand-made OCLV carbon construction damps vibrations to quash road buzz and trims grams to give you the lightest aero setup possible. This UCI-legal base bar is compatible with Bontrager clip-ons and aero brake levers, and it uses internal cable routing for a slippery, low-drag profile. And, it boasts a 31.8mm clamp diameter for stiffness that kicks in every time you accelerate.
Zipp Vuka Aero Integrated Aerobar
$840.00
Vuka Aero is an integrated aero bar that can be used with any stem to help you find your ideal position on the bike. This bar is stiff and streamlined while maintaining the UCI's 3:1 aspect ratio requirement. - Removable center cap, placed in front of the stem, adds 5 percent stiffness to the aero bar and integrates seamlessly with the airfoil - Ships with base bar, extension clamps, armrest clamps, risers (two each of 5mm, 10mm, 25mm and 50mm risers), Vuka armrest pads, Vuka armrest and steel hardware - Clamp hardware and riser kits for the Vuka Aero are modeled after Zipp's pro-proven Vuka Stealth aero cockpit - Rapid Routing cable exits are positioned for easy installation of brake cables - 22.2mm extensions and stem not included - Extensions sold separately - Clamp Width: 54mm
Zipp Vuka Aero Handlebars
$900.00
Zipp's Vuka Aero redefines aero handlebar conventions while being compatible with modern-day aero bikes. The current redesigned Vuka Aero builds on the technological foundation of aero excellence set by the original version. Vuka Aero is an integrated aero bar that features leading adjustability; can be used with any stem to help you find your ideal position on the bike. The SRAM eTap AXS Blip Box fits neatly within the center cap, keeping it out of the wind and out of sight for a clean and efficient cockpit. The airfoil used in the Vuka Aero is based on the shape of the SL-70 Aero road bar. The result is an aero bar that's stiff and streamlined while maintaining the UCI's 3:1 aspect ratio requirement. - Vuka Aero ships with base bar, extension clamp, and armrest clamp - Extensions sold separately - New Center cap has an integrated mount for the SRAM eTap AXS Blip Box and keeps it hidden and out of the wind - Wide range of adjustment - Works on a wide range of integrated bikes - Works with any 31.8 clamp stem - Removable center cap, placed in front of the stem, adds 5 percent stiffness to the aero bar and integrates seamlessly to the base bar. - Integrated Carbon Aerobar works with any 31.8 clamp stem - Integrated SRAM eTap AXS Blip box mount in the Center Cap - Rapid Routing cable exits are positioned for easy installation of brake cables - ISO 4210 compliant. See Declaration of Conformity for detail - Drop: 0mm - Clip compatible Integrated - Width (center-to-center): 40cm - Brake lever compatibility: Plug Style - Clamp width: 52mm
Page 1 of 1